Home | About BioSec | Contact Us

Parts & Service

BioSec Enviro is committed to providing full service and support to all of our customers.  BioSec’s fully trained service technicians are able to provide aftermarket support, maintenance services, and develop preventative maintenance programs specifically tailored to your installation. 

BioSec Enviro’s manufacturing facility is also able to quickly supply spare parts for all BioSec supplied equipment, as well as other OEM engineered or CEMA-type equipment.

In addition, our in-house Engineering support team is able to provide our customers with answers to design, maintenance, and service concerns.

Aftermarket Conveyor System Spare Parts List

Shafted Rotors

10 ft long rotor, 304 S/S, 12" dia, single pitch 1/4" thick flights
10 ft long rotor, 304 S/S, 14" dia, single pitch 1/4" thick flights
10 ft long rotor, 304 S/S, 16" dia, single pitch 1/4" thick flights
10 ft long rotor, 304 S/S, 18" dia, single pitch 1/4" thick flights
10 ft long rotor, 304 S/S, 20" dia, single pitch 1/4" thick flights
10 ft long rotor, 304 S/S, 22" dia, single pitch 1/4" thick flights
10 ft long rotor, 304 S/S, 24" dia, single pitch 1/4" thick flights
Special length, pitch, material and construction also available

Intermediate Bearings Roller

Intermediate Bearing Assembly, 65 mm
Intermediate Bearing Assembly, 80 mm
Intermediate Bearing Assembly, 100 mm
Intermediate Bearing Assembly, 140 mm
Flex-Coupling, 5-Ring

Intermediate Bearings CEMA

CEMA Hanger Bearings, c/w Bushing

Spirals

Shaftless Spirals, 210 mm dia, no insert
Shaftless Spirals, 210 mm dia, no insert
Shaftless Spirals, 210 mm dia, no insert
Shaftless Spirals, 210 mm dia, no insert
Shaftless Spirals, 210 mm dia, no insert
Shaftless Spirals – Available various diameters, pitch, and lengths
Two half couplings (drive shaft and spiral)

Wear Liners

Wear Liners, BioWear UHMW Inserts – various thicknesses
Wear Bars four 1-1/4 wide x 10 ft long, 400 Brinnel bars

Conveyor Drives

Drive Motors
Gear Reducer (Nord, Flender, SEW Euro Drive)
Drive Shaft
Tail Shaft
Drive Shaft Bearing
Tail Shaft Bearing

Conveyors Parts

Set of Gaskets (12" Trough, Neoprene 50 Duro)
Set of Packing ( 1/2" sq, Teflon Impregnated, 4 ring)
Set of Packing ( 1/2" sq, Teflon Impregnated, 2 ring)
Grease Lantern Ring
Shaft Wear Sleeves
4 ft long, 1/8" thick 304 S/S, turned down edges, and bolted
4 ft long, 1/8" 304 S/S, turned down edges, and clamped
4 ft long, 1/8" thick 304 S/S, turned down edges, hinged and clamped

Slide Gates

Electric Slide Gate Actuator (Limitorque MX-05)
Pneumatics Slide Gate Actuator
Pneumatic Actuator, FRL Unit)
Set of Slide Gate Seals (12" x 18")

Controls

Safety Pull Cord Unit
Motion Sensor Probe
Ultra-Sonic Sensors
Torque Overload
Limit Switches